【沈阳】滚轮导靴安装注意事项解说词

木屋配音为您推荐一篇解说词，这篇文案是由木屋配音老师倾心演绎。如有配音需要请联系QQ：715006566 或者致电配音热线：0431-85929883

For re-installation

Preparations before lifting

Erection of scaffolding platform

At the appropriate height, relative to the weight of two rail bracket hoisting rope tied in a rope hanging down the center of the chain hoist

Heavy lifting before, you need to remove the side of the shoe

If the shoe for roller, to four guide shoes are removed

Hoisting heavy framework

Hand pull hoist will hang heavy frame to the appropriate height

Make the shoe fit the side rails and maintain contact

In heavy bumper mounting positions on both sides of each branch of a 100 × 100mm wooden

Square wooden seat height = height + buffer buffer overrun distance height +

Gently pour relax chain, so that heavy aircraft smoothly securely mounted on wooden poles

Both sides were not loaded when the shoe's on the heavy wooden frame fixed on, both sides should make the frame and guide rail end and an equal distance

Counterweight guide shoe installation, adjustment

Installation guide shoe

When the sliding guide shoe lining and installation to ensure the rail end clearance, under identical

Roller guide shoe installation to be smooth, the two sides of the wheel after wheel rail should equal the amount of compression of spring, compression size should be specified by the manufacturer.

If no provision is based on the use of moderate pressure adjustment, front wheel should face pressed rail, wheel centering rail center.

Installation and fixed weights of

Installation on weight

Installed according to the manufacturer to design requirements for weight clamping device.

Clamping device to prevent the weight of the weight issue in the elevator when the collision sound

In addition to the top wire type, as well as baffle, top tube type two clamping device

Compensation pier installation

Under heavy collision at the plate should be installed to compensate pier

配音业务洽谈QQ：715006566     配音服务热线：0431-85929883